Port 27876 ASTROLINK
Port 27876 is the IANA-assigned astrolink port for Astrolink Protocol (TCP).
What is port 27876 used for?
Port 27876 is assigned to astrolink and uses TCP. The IANA registry describes the service as “Astrolink Protocol”. It sits above the registered range, where most numbers are transient client ports. A fixed high port is worth documenting precisely because tooling often assumes the default.
Ports are the transport-layer address a service listens on. A client that wants to reach astrolink connects to port 27876. If nothing is listening, the connection is refused. That is why a port conflict appears whenever two processes try to bind the same number.
Use the commands below to confirm whether port 27876 is actually in use before you change firewall rules. Blocking the port stops new inbound traffic at the firewall, but it does not stop a local process from listening, and it does not remove the service from the machine.
Browse all Development servers ports
Source: IANA Service Name and Transport Protocol Port Number Registry. Registered assignee: [Alanax_Technologies_Inc].
Check and block port 27876
Copy-ready commands for the protocols assigned to this port. Run the check first, then block only what should not be reachable.
Check on Linux
sudo ss -tlpn 'sport = :27876'Check on Windows
Get-NetTCPConnection -LocalPort 27876 -State Listen -ErrorAction SilentlyContinueBlock with UFW
sudo ufw deny 27876/tcpBlock with iptables
sudo iptables -A INPUT -p tcp --dport 27876 -j DROPThese commands are examples for a typical host. Check the listener before you change firewall rules, and persist iptables rules with iptables-save or netfilter-persistent. On Windows, use Windows Defender Firewall or New-NetFirewallRule for persistent blocks. The iptables rules here cover IPv4; mirror them with ip6tables if IPv6 is enabled.
Is port 27876 safe to expose?
This port is not on our curated list of services with a widely exploited profile. Exposure is only safe when the listening service is intended, patched and protected by a firewall. Keep the listening service patched and remove it if unused. A default-deny firewall policy with explicit allow rules is still the safest baseline.
Where port 27876 is usually used
Most traffic on port 27876 falls into these scenarios. The demo below is a safe way to confirm the listener before you change anything.
- Starting a framework development server and opening the localhost URL it prints.
- Testing a frontend against a local API, proxy or mock service.
- Hot-reload sessions that should stay bound to 127.0.0.1 instead of a public interface.
Start a local server
Most development servers accept an explicit port. This starts a static file server on 27876.
python3 -m http.server 27876Common problems with port 27876
Connection refused or timed out
Refused usually means the host is reachable but nothing is listening on port 27876. A timeout more often means a firewall drop, a wrong host or a service bound to a different interface.
Port already in use
Find the process holding the port with sudo ss -tlpn 'sport = :27876' or sudo lsof -i :27876. Stop that process or configure it to bind another port; killing it without identifying it can take down a production service.
Firewall rule did not survive a reboot
UFW and Windows Firewall keep rules across restarts. Raw iptables rules do not: save them with iptables-save or the netfilter-persistent package, and re-apply after upgrades that reset the ruleset.
The port is blocked but still reachable
A firewall rule filters inbound traffic; it does not close the listener. Confirm with the check command above and bind the service to 127.0.0.1 when only local clients need it.
Port 27876 at a glance
| Port number | 27876 |
|---|---|
| Service name | astrolink |
| Transport protocol | TCP |
| Category | Development servers |
| Range | High port (10001–65535) |
| Risk level | Standard/Low |
| Registered assignee | [Alanax_Technologies_Inc] |
| Registry description | Astrolink Protocol |
| Source | IANA Service Name and Transport Protocol Port Number Registry |
Frequently asked questions
What is port 27876 used for?
Port 27876 (ASTROLINK) uses TCP. Astrolink Protocol.
How do I check if port 27876 is open?
On Linux run `sudo ss -tlpn 'sport = :27876'`. On Windows run `Get-NetTCPConnection -LocalPort 27876 -State Listen -ErrorAction SilentlyContinue` in PowerShell. If the port is open, the output shows a process listening on port 27876; empty output usually means nothing is bound to it.
How do I block port 27876?
With UFW run `sudo ufw deny 27876/tcp`. With iptables run `sudo iptables -A INPUT -p tcp --dport 27876 -j DROP`. Persist the iptables rules with your distribution's netfilter-persistent or iptables-save tooling so they survive a reboot.
Is port 27876 safe to expose?
This port is not on our curated list of services with a widely exploited profile. Exposure is only safe when the listening service is intended, patched and protected by a firewall. Nevertheless, keep the listening service patched and remove it if unused. A default-deny firewall policy with explicit allow rules is still the safest baseline.
Related ports
Primary data: IANA Service Name and Transport Protocol Port Number Registry.
Last reviewed 2026-10-30 · Methodology · About · Privacy